A cannabis dropper is the graduated glass pipette that comes with a CBD tincture bottle. It pulls oil from the bottle and releases it in measured amounts, so you can track how much you take instead of guessing. When you compare tinctures, the dropper and its markings matter as much as the oil inside.
Key Features
- Printed marks at 0.25 mL, 0.5 mL, 0.75 mL and 1 mL so a dose reads directly on the glass.
- Clear glass barrel that does not react with oil and wipes clean.
- Food-grade silicone or natural rubber bulb that draws smoothly and seals on release.
- Child-resistant collar that holds the pipette in the neck and clicks shut.
- Tapered tip sized for standard 15 mL, 30 mL and 60 mL tincture bottles.
- Common 18-400 and 20-400 cap threading.
- Gasket or nozzle ring that stops oil seeping around the collar.
- Compact length, usually 3 to 4 inches, so it stores with the bottle.
Materials and Specs
Most barrels are borosilicate or soda-lime glass because glass is inert, easy to sanitize, and does not hold onto flavors the way plastic can. The bulb is typically silicone, which stays flexible longer than latex and resists carrier oils such as MCT or hemp seed oil. Graduations are either fired onto the glass or printed with food-safe ink; if the numbers rub off in your hand, the markings are painted and will fade with washing. Capacity is usually 1 mL, with a tip long enough to reach the bottom of a 30 mL bottle. Replacements are sold on their own, so check the thread size against your bottle before buying.
Shipping and Returns
Orders ship in discreet packaging with the glass cushioned so it arrives uncracked. Most shops accept unopened, unused droppers within a set return window, and items that arrive damaged are replaced after a quick photo. Check the store's policy page for the exact timeline and condition rules before ordering.
How do you use a cannabis dropper?
Squeeze the bulb, dip the tip into the oil, and release to draw up slightly more than you need. Read the level at eye height, then press the bulb gently to release the oil under your tongue and hold it there for about a minute.
How do you clean a cannabis dropper?
Rinse the glass with warm water and a drop of mild soap, work the bulb a few times, then rinse and air-dry both parts separately. Skip alcohol on the rubber, which can dry it out.
Which dropper size fits your bottle?
Match the cap thread to the bottle neck, usually 18-400 for 15 mL bottles and 20-400 for 30 mL and 60 mL bottles. A cap that spins without catching means the thread is wrong.